こういった疑問に答えます。
- Volatility Factor 2.0 Proのパラメーター設定はデフォルトでOK
- Volatility Factor 2.0 Proで重要なパラメーターはこれ
- Volatility Factor 2.0 Proのパラメーター設定を変更する前に
この記事を書いている筆者は、専業投資家歴8年ほど。2016年からは東南アジアで海外ノマドをしながら、投資収益だけで生活しています。
パラメーター設定はもっと正当に理解され、かつ利用されるべきという想いを込めて、「Volatility Factor 2.0 Proのパラメーター設定」を記事にします。
※この記事はすでに「Volatility Factor 2.0 Pro」を購入済みの方向けです。購入がまだの方は、これを機にぜひどうぞ。60日間の無条件返金保証もあるので、これを機に始めてみてください。
解説記事Volatility Factor 2.0 Proを検証してレビューする【そして爆益で終わる】
Volatility Factor 2.0 Proのパラメーター設定はデフォルトでOKです
筆者の経験から言えることは、最初はデフォルト設定のままがいいです。
実際にパラメーター設定を変える場合も、そんなに大きく変えることはありません。ちょっと変えて様子見、、、また元に戻して様子見、こんな感じ。
ただ、Volatility Factor 2.0 Pro公式サイトが推奨している、つぎの3点については必ずその通りにしましょう。
- 推奨する利用方法
- 推奨する運用環境
- 推奨するブローカーのスプレッド
推奨する利用方法
1.リアル口座で取引する前に、デモ口座で稼働することをお勧めします。これにより、リアル口座に現金を投入する前に、Volatility Factor 2.0 Proの動作に慣れることができます。
2.取引量を決定し、リスク管理に関するパラメーターを設定するときは、特に注意してください。
3.Volatility Factor 2.0 Proが正しく動作していないと思われる場合は、操作を中止して、すぐに販売元に連絡してください。
推奨する運用環境
・RAM:1 GB 以上
・OS:Windows XP, Windows Vista, Windows 7 以上
推奨するFXブローカーのスプレッド
・GBPUSDは3Pips未満
・USDJPYは2Pips未満
» 60日間の無条件返金保証:Volatility Factor 2.0 Pro公式サイトを見てみる
Volatility Factor 2.0 Proで重要なパラメーターはこれ
Volatility Factor 2.0 Proのパラメーターの設定は42個あります。
そして、パラメーターの設定は大きく分けて3つに分類できます。
- 1.基本のパラメーター設定
- 2.リスク管理のパラメーター設定
- 3.時間のパラメーター設定
上記のとおりです。それでは見ていきましょう。
1.基本のパラメーター設定
Volatility Factor 2.0 Proの基本のパラメーターの設定になります。
次の6つのパラメーターの設定は必ず確認しましょう。
- ② Magic:マジックナンバー※複数通貨ペア稼働の場合は必須
- ⑥ MaxSPREAD:許容する最大スプレッド幅
- ⑦ Slippage:許容できる最大スリッページ
- ⑬ MaxNegAdds:逆行した場合に追加するポジション数
- ⑳ UseCustomPair true/false:サポート対象外の通貨ペアの稼働
- ㉑ UseSettingsFrom:⑳を”true”した際、使用する通貨ペアの設定
①:WinLargeFonts true/false
: use “true” to adjust the robot information box display in case you are using the Windows Large Fonts.
「true」で有効化、「false」で無効化
②:Magic
: a unique identifier through which WallStreet 2.0 Evolution recognises and manages its own positions. If you use other expert advisors on the same account, please ensure that each of them has a distinct unique identifier.
同じ口座で複数のEAを動かす場合は、必ず個別にちがうマジックナンバーを入力
MT4では、マジックナンバーは注文の識別番号です。 MT4のEAは、あるポジションが、どこから発注されたのかを、マジックナンバーによって識別します。 マジックナンバーは、MT4の同一口座で1つのEAしか運用しない場合は必要ありません。
③:EA_Comment
: you can type here a comment, if you wish to mark the WallStreet 2.0 Evolution trades.
④:Signal_1 true/false
: Activates the trading signal, which is generated in the direction of the current market impulse.
「true」で有効化、「false」で無効化
⑤:Signal_2 true/false
: Activates the trading signal, which is generated against the current market impulse. This signal is generated only in specific hours and this is the only strategy which is affected by the GMT_Offset and the DST_Usage parameters. If you do not want to use this signal you should not worry about the GMT_Offset and the DST_Usage parameters.
「true」で有効化、「false」で無効化
⑥:MaxSPREAD
: maximum allowed spread.
スプレッドとは「売値と買値の差」のことで、実質的なFX取引における手数料となります。このスプレッドが0.3銭であれば、10,000通貨単位の取引では30円のコストとなります。
⑦:Slippage
: maximum allowed slippage.
スリッページとは、注文した価格と実際に約定した価格の差のことを言います。 変動が大きい相場では、スリッページが発生する可能性があり、不利なレートまたは有利なレートで約定する場合があります。
⑧:NFA true/false
: use “true” if your broker is NFA regulated.
NFAとは、National Futures Associationの略で、全米先物協会のことです。
⑨:AutoGMT_Offset true/false
– this parameter controls the GMT Offset calculation method. In most of the cases, the automatic GMT value is correct. However, in some cases, you may need to enter the GMT Offset by yourself. In this case, switch AutoGMT_Offset to false and enter the value you need in the ManualGMT_Offset parameter.
「true」で有効化、「false」で無効化
GMTとはGreenwich Mean Timeの略で、グリニッジ標準時のことです。 たとえばFX最大の市場であるニューヨークでは、冬時間は「GMT+2」ですが、夏時間では「GMT+3」となります。
⑩:ManualGMT_Offset
– in case you switch to AutoGMT_Offset=false, the value of this parameter should be the right GMT Offset of your broker (usually, the winter GMT offset). As well, in case you perform a backtest, you should enter here the correct GMT Offset for the historical data you use – otherwise, the backtest will be incorrect.
⑪:DST_Usage true/false
– activates the automatic DST (Daylight Saving Time) correction.
「true」で有効化、「false」で無効化
⑫:BetterPricePips
: Minimal distance, in standard (4 digits) pips, between the initial position and the additional positions. In the Volatility Factor settings, this value is zero, which means that the default value of BetterPricePips is used.
「0」でデフォルト値が適用
⑬:MaxNegAdds
: Shows how many additional positions can be added to the initial position when the price is moving in a negative direction.
⑭:ForceProfit
: The average profit for all open SELL or BUY positions, in standard (4 digits) pips, on which Volatility Factor will close all positions by market. In the Volatility Factor settings, this value is zero, which means that the default value of ForceProfit is used. You have information for the default
ForceProfit and ForceLoss values in the Volatility Factor HUD (Heads-up Display).
「0」でデフォルトの設定値が適用
⑮:ForceLoss
: The average loss for all open SELL or BUY positions, in standard (4 digits) pips, on which Volatility Factor will close all positions by market. In the Volatility Factor settings, this value is zero, which means that the default value of ForceProfit is used. You have information for the default ForceProfit and ForceLoss values in the Volatility Factor HUD (Heads-up Display).
「0」でデフォルトの設定値が適用
⑯:FixedTakeProfit
: A fixed TakeProfit level in standard (4 digits) pips, which is identical for all open SELL or BUY positions. In the Volatility Factor settings, this value is zero, which means that FixedTakeProfit is not used. This allows your exit levels to be hidden from the broker. You can use FixedTakeProfit by your estimation.
「0」でデフォルトの設定値が適用
⑰:FixedStopLoss
: A fixed stoploss level, which is identical for all open SELL or BUY positions. In the Volatility Factor settings, this value is zero, which means that FixedStopLoss is not used. In this way, your exit levels will be hidden from the broker. Use your judgment to decide when to use FixedStopLoss.
「0」でデフォルトの設定値が適用
⑱:CloseOnlyOnProfit true/false
: when this mode is enabled, positions close to system signals only, when they are in profit (MinProfitPips), or where stoploss may be reached. If CloseOnlyOnProfit= false /default/, positions close to system logic even it is on a loss.
「true」で有効化、「false」で無効化
⑲:MinProfitPips
: The minimum average profit in standard (4 digits) pips, on which Volatility Factor will close all positions by system exit signal, when CloseOnlyOnProfit is true.
⑳:UseCustomPair true/false
: if you wish to use WallStreet 2.0 Evolution on a unsupported currency pair, change UseCustomPair=true
「true」で有効化、「false」で無効化
㉑:UseSettingsFrom
: if you wish to use WallStreet 2.0 Evolution on an unsupported currency pair, with this input parameter you can choose, which supported settings you wish to use. It is not necessary to change this parameter if you use some of the supported currency pairs. It is only in case you use “UseCustomPair=true”.
サポートされている通貨ペアのうちのいずれか
2.リスク管理のパラメーター設定
Volatility Factor 2.0 Proのリスク管理のパラメーター設定になります。
基本的にはマネーマネジメント機能と取引ロットに関する設定です。取引スタイルや相場環境によってリスクは変わってくるので最も変更することが多いパラメーターでもあります。
次の6つのパラメーターがとくに重要です。
- ㉒ RecoveryMode true/false:ドローダウン時にロット数を徐々に増やす
- ㉓ FixedLots:固定ロットの場合のロット数
- ㉔ AutoMM:口座残高によって自動で取引ロットを設定する機能
- ㉗ Avoid_News true/false:重要指標発表の前後取引を行わない
- ㉙ Wait_Before_News:㉗設定時、発表時間の何分前に取引を停止
- ㉚ Wait_After_News:㉗設定時、発表時間の何分後まで取引を停止
㉒:RecoveryMode true/false
: when RecoveryMode is activated, an algorithm effectively compensates current drawdown through smooth increases of trading volumes. This mode is active only when AutoMM is greater than zero (AutoMM > 0). Before activating RecoveryMode, please bear in mind that it can significantly increase risk to your account. For this reason, RecoveryMode should be used at low values of the AutoMM parameter.
「AutoMM」の値が「0より大きい」場合、動作します
㉓:FixedLots
: the extent of the fixed trading volume. If you use AutoMM>0, the value of the FixedLots parameter does not matter.
「AutoMM」の値が「0」の場合、動作します
㉔:AutoMM
: automatic risk management activates at values greater than zero:
– Example 1: at AutoMM = 2, WallStreet 2.0 Evolution opens positions equal to 0.2 lots (20,000) given account extent of 10,000. This places 2 percent of the account extent at risk per individual transaction at a loss of 100 pips.
– Example 2: at AutoMM = 10, WallStreet 2.0 Evolution opens positions equal to 1 lot (100,000) given account extent of 10,000. This places 10 percent of the account extent at risk per individual transaction at a loss of 100 pips.
例1:証拠金10,000ドルで「AutoMM : 1」の場合、取引あたり「0.1ロット」となります
例2:証拠金10,000ドルで「AutoMM : 2」の場合、取引あたり「0.2ロット」となります
例3:証拠金10万円で「AutoMM : 1」の場合、取引あたり「0.01ロット」となります
例4:証拠金10万円で「AutoMM : 2」の場合、取引あたり「0.02ロット」となります
㉕:AutoMM_Max
: the maximum permitted risk expressed as a percentage of the account per individual transaction, calculated on the basis of a 100 pip loss.
「AutoMM」の値より大きい値を設定します
㉖:Avoid_News true/false
– if you wish to use the news filter function, you should set Avoid_News=true
「true」で有効化、「false」で無効化
㉗:Include_Medium_News true/false
: if you also wish to avoid the medium impact news, you should set Include_Medium_News=true
「true」で有効化、「false」で無効化
㉘:Wait_Before_News
: the number of minutes before the news event, during which trading will be switched off
㉙:Wait_After_News
: the number of minutes after the news event, during which trading will be switched off
3.時間のパラメーター設定
Volatility Factor 2.0 Proで取引をしない時間帯を、設定するパラメーターになります。
具体的には「早朝は取引しない」「NY時間以外は取引しない」など、といった感じで使います。また、EAの取引履歴をみて勝率が低い時間帯があれば、その時間帯のみ取引を停止したりできます。
次の3つのパラメーターの設定が実際によく使われます。
- ㉚ NoAddsAlso true/false:重要指標発表の前後取引を行わない
- ㉛~㊴ —dayTrading true/false:取引しない曜日を設定
- ㉜~㊵ —dayHoursForbidden:取引しない時間帯を設定
㉚:NoAddsAlso true/false
– when this parameter is enabled, the EA will not open any additional positions during the forbidden trading hours.
「true」で有効化、「false」で無効化
㉛:MondayTrading true/false
– enables trading on Monday.
「true」で有効化、「false」で無効化
㉜:MondayHoursForbidden
– sets forbidden trading hours for Monday (applies only when MondayTrading is enabled). You can set several values between 0 and 23 separated with commas. For example, if you set MondayHoursForbidden=9,10,11 the EA will not trade from 9:00 till 11:59. The hour values for this parameter are related to your broker’s server time (the Market Watch)!
例えば「9,10,11」と入力すると「9:00~10:59」のあいだ取引を行いません
㉝:TuesdayTrading true/false
– enables trading on Tuesday.
「true」で有効化、「false」で無効化
㉞:TuesdayHoursForbidden
– same as MondayHoursForbidden with the difference that you set forbidden hours for Tuesday.
㉟:WednesdayTrading true/false
– enables trading on Wednesday.
「true」で有効化、「false」で無効化
㊱:WednesdayHoursForbidden
– same as MondayHoursForbidden with the difference that you set forbidden hours for Wednesday.
㊲:ThursdayTrading true/false
– enables trading on Thursday.
「true」で有効化、「false」で無効化
㊳:ThursdayHoursForbidden
– same as MondayHoursForbidden with the difference that you set forbidden hours for Thursday.
㊴:FridayTrading true/false
– enables trading on Friday.
「true」で有効化、「false」で無効化
㊵:FridayHoursForbidden
– same as MondayHoursForbidden with the difference that you set forbidden hours for Friday.
㊶:SaturdayTrading true/false
– enables trading during Saturday respectively. Due to big GMT offset, some brokers trade during weekends and for that reason we added these parameters as well.
「true」で有効化、「false」で無効化
㊷:SundayTrading true/false
– enables trading during Sunday respectively. Due to big GMT offset, some brokers trade during weekends and for that reason we added these parameters as well.
「true」で有効化、「false」で無効化
» 60日間の無条件返金保証:Volatility Factor 2.0 Pro公式サイトを見てみる
Volatility Factor 2.0 Proのパラメーター設定を変更する前に
ここまでVolatility Factor 2.0 Proのパラメーターの設定について解説してきました。
Volatility Factor 2.0 Proのような販売歴が長いEAは、ロジックに優位性があることが証明済みなので、パラーメーターの調整に時間を割くことは有益と言えます。
というわけで、今回は以上となります。
Volatility Factor 2.0 Proで取引をする場合は、まずはデモ口座から始めてみてください。
» 60日間の無条件返金保証:Volatility Factor 2.0 Pro公式サイトを見てみる